Benefits of ceramic coating and heat shields

What thermal barrier coating and heat shields do for your exhaust system, your engine and you, and why to have it done with us.

Relative surface temperature of a part
Uncoated
100%
Coated, 0.3 mm
67–75%

About 25–33% lower surface temperature at 0.3 mm coating thickness. The result depends on the part, its material and the engine.

What ceramic coating does

  1. Protects metal parts from overheating and weld seams from cracking

  2. On naturally aspirated engines, a steady exhaust gas speed, because the heat stays in the gas instead of the metal

  3. Lower coolant and engine oil temperatures, as the coated exhaust helps carry heat away from the engine

  4. Better power curves, an engine that revs higher, and quicker, easier tuning on the dyno

  5. Better acceleration, and an exhaust that reaches working temperature sooner

  6. More options when building engines for motorsport and tuning

  7. A big temperature drop and better exhaust gas flow on turbo engines; on naturally aspirated engines, too, the coating gives the flow they need

  8. Corrosion protection for steel and cast iron

  9. A clean look without exhaust wrap

TBC thermal barrier coating for engine and exhaust parts

What heat shields do

  • Works with coated exhaust parts as one solution
  • Holds back radiated heat where a coating alone does not help
  • Protects paint and lines next to the exhaust system
  • Lower temperature in the cabin

See heat shields

Heat you can deal with at the source

Heat soak under the bonnet

A hot manifold and turbo heat everything around them: wiring, hoses, the intake and the intercooler piping. Hot intake air costs power, most of all after a few laps or in slow traffic.

Rusty, scaled manifolds

Heat cycles and moisture attack bare steel and cast iron. A ceramic layer protects the surface from oxidation and corrosion.

Wrap that falls apart

Exhaust wrap holds moisture against the pipe, frays and has to be replaced. A bonded ceramic coating insulates the pipe without trapping water.

Why coat with JZ Motorsports

Close by, inside the EU
Parcels travel between Riga and the rest of the Baltics in a few days, and customers in the EU send parts without customs paperwork.
Direct contact
You talk to the person who prepares and coats your part. No call centre and no reseller in between.
In motorsport since 1961
Family experience in motorsport since 1961, SWEPCO oils since 2000 and ceramic coatings since 2010.
A clear quote first
Send photos and get a price and a timeline before you ship anything. The consultation is free.

Thermal-spray ceramic compared with the alternatives

All four are sold as heat protection for exhausts. They are different products that do different jobs.

Thermal-spray ceramicThin-film ceramic coatingHigh-temperature paintExhaust wrap
What it isCeramic oxide layers sprayed over a metal bond layerCeramic-filled liquid coating, sprayed on and oven-curedSilicone-based paintFibre tape wound around the pipe
Typical thicknessAbout 0.3 mmUsually under 0.05 mmVery thinSeveral millimetres
Main jobHeat insulation and surface protectionColour and corrosion protection, some heat reductionColour and basic rust protectionHeat insulation
Keep in mindNeeds professional applicationInsulates less than a thicker ceramic layerLittle effect on heatHolds moisture; can speed up corrosion

Thin-film coatings are a good choice for colour and corrosion protection. When the goal is to keep heat inside the pipe, the thickness of the ceramic layer matters.

Get a quote for your part

Tell us what you want coated and add a few photos. We reply with a price and a timeline.

For example: BMW E46 M3 with S54 engine, or Honda CBR600RR 2008

Race or road use, known problems, your deadline

Photos (optional)

Up to 6 photos. Large photos are made smaller before sending.

WhatsAppCallGet a quote